User manual – 3xLOGIC VISIX Camera User Manual

Page 67

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

59  

 

Figure  6-­‐48

Linkage  Method  

 

CONFIGURING  ALARM  OUTPUT  

Steps:  
1) Enter  the  Alarm  Output  Settings  interface:  

Configuration>Advanced  Configuration>  Events  >  Alarm  Output  

2) Select  one  alarm  output  channel  in  the  Alarm  Output  drop-­‐down  list.  

3) Set  a  name  in  

  for  the  alarm  

output  (optional).  

4) The  Delay  time  can  be  set  to  5sec,  10sec,  30sec,  1min,  2min,  5min,  10min  or  Manual.  The  delay  

time  refers  to  the  time  duration  that  the  alarm  output  remains  in  effect  after  alarm  occurs.  

5) Click  

  to  enter  the  Edit  Schedule  Time  interface.  The  time  schedule  configuration  is  

the  same  as  the  settings  of  the  arming  schedule  for  motion  detection.  Refer  to  Step  2  Set  the  
Arming  Schedule  for  Motion  Detection
 in  Section  6.6.1  Configuring  Motion  Detection.  

6) You  can  copy  the  settings  to  other  alarm  outputs.  

7) Click  

  to  save  the  settings.  

Advertising