User manual – 3xLOGIC VISIX Camera User Manual

Page 48

Advertising
background image

User  Manual  

|  VISIX  5  Inch  Speed  Dome  Camera  

 
 

CONFIGURING  UPNP™  SETTINGS  

Universal  Plug  and  Play  (UPnP™)  is  a  networking  architecture  that  provides  compatibility  among  
networking  equipment,  software  and  other  hardware  devices.  The  UPnP  protocol  allows  devices  to  
connect  seamlessly  and  to  simplify  the  implementation  of  networks  in  the  house  and  corporate  
environments.  
With  the  function  enabled,  you  don’t  need  to  configure  the  port  mapping  for  each  port,  and  the  
camera  is  connected  to  the  Wide  Area  Network  via  the  router.  
Steps:  
1. Enter  the  UPnP™  settings  interface.  

Configuration  >Advanced  Configuration  >  Network  >  UPnP  

2. Check  the  checkbox  to  enable  the  UPnP™  function.  

You  can  edit  the  Friendly  Name  of  the  speed  dome.  This  name  can  be  detected  by  corresponding  
device,  such  as  a  router.  

 

Figure  6-­‐22

Configure  UPnP  Settings  

 

CONFIGURING  NAT  (NETWORK  ADDRESS  TRANSLATION)  SETTINGS  

Steps:  
1. Set  the  port  mapping  mode:  

To  port  mapping  with  the  default  port  numbers:  

Choose  

 

To  port  mapping  with  the  customized  port  numbers:  

Choose  

 

And  you  can  customize  the  value  of  the  port  number  by  yourself.  

 

2. Click  

  to  save  the  settings.  

Advertising