User manual – 3xLOGIC VISIX Camera User Manual

Page 41

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

33  

SDK  Port:  The  default  port  number  is  8000.  

3)

Click  

  to  save  the  settings.  

 

CONFIGURING  PPPOE  SETTINGS  

Purpose:  
If  you  have  no  router  but  only  a  modem,  you  can  use  Point-­‐to-­‐Point  Protocol  over  Ethernet  (PPPoE)  
function.  
Steps:  

1) Enter  the  PPPoE  Settings  interface:  

 

Configuration  >Advanced  Configuration  >  Network  >  PPPoE  

 

Figure  6-­‐10

PPPoE  Settings  

 

2) Check  the  Enable  PPPoE  checkbox  to  enable  this  feature.  
3) Enter  User  Name,  Password,  and  Confirm  password  for  PPPoE  access.  

NOTE:

 The  User  Name  and  Password  should  be  assigned  by  your  ISP.  

4) Click  

  to  save  and  exit  the  interface.  

 

CONFIGURING  DDNS  SETTINGS  

Purpose:  
If  your  speed  dome  is  set  to  use  PPPoE  as  its  default  network  connection,  you  can  use  the  Dynamic  
DNS  (DDNS)  for  network  access.  
Before  you  start:  
Registration  on  the  DDNS  server  is  required  before  configuring  the  DDNS  settings  of  the  speed  dome.  
Steps:  

1) Enter  the  DDNS  Settings  interface:  

Configuration  >  Advanced  Configuration  >  Network  >  DDNS  

Advertising