5 ptz configuration – 3xLOGIC VISIX Camera User Manual

Page 27

Advertising
background image

User  Manual  

|  VISIX  5  Inch  Speed  Dome  Camera  

 

5 PTZ  Configuration  

5.1 Configuring  Initial  Position  

Purpose:    
The  initial  position  is  the  origin  of  PTZ  coordinates.  It  can  be  the  factory  default  initial  position.  You  
can  also  customize  the  initial  position  according  to  your  own  demand.  

!

Customize  an  Initial  Position:  

Steps:  

1)

Enter  the  Initial  Position  Configuration  interface:  

Configuration  >  Advanced  Configuration  >  PTZ  >  Initial  Position  

 

Figure  5-­‐1

PTZ  Configuration  

2)

Click  the  PTZ  control  buttons  to  find  a  position  as  the  initial  position  of  the  dome;  you  can  
also  call  a  defined  preset  and  set  it  as  the  initial  position  of  the  dome.  

3)

Click  Set  to  save  the  position.  

 
 

!

Call/Delete  an  Initial  Position:  

You  can  click  

  to  call  the  initial  position.  You  can  click  

  to  delete  the  

initial  position  and  restore  the  factory  default  initial  position.  
 

5.2 Configuring  Basic  PTZ  Parameters  

Purpose:    
You  can  configure  the  basic  PTZ  parameters,  including  proportional  pan,  preset  freezing,  preset  speed,  
etc.  

1) Enter  the  Basic  PTZ  Parameter  Configuration  interface:  

Configuration  >  Advanced  Configuration  >  PTZ  >  Basic  

Advertising