User manual – 3xLOGIC VISIX Camera User Manual

Page 54

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

46  

 
Steps:  

1) Enter  the  Display  Settings  interface:  

Configuration  >  Basic  Configuration>  Image>  Display  Settings  
Or  Configuration  >  Advanced  Configuration>  Image>  Display  Settings  

2) Set  the  image  parameters  of  the  speed  dome.  

 

 

Figure  6-­‐27

Display  Settings  

Image  Adjustment  
 

!

Brightness:     This  feature  is  used  to  adjust  brightness  of  the  image.  The  value  ranges  from  0  to  
100.  

!

Contrast:     This  feature  enhances  the  difference  in  color  and  light  between  parts  of  an  image.  
The  value  ranges  from  0  to  100.  

!

Saturation:     This  feature  is  used  to  adjust  color  saturation  of  the  image.  The  value  ranges  from  0  
to  100.  

!

Sharpness:     Sharpness  function  enhances  the  detail  of  the  image  by  sharpening  the  edges  in  the  
image.  The  value  ranges  from  0  to  100.  

NOTE:

 

This  function  varies  depending  on  the  models  of  speed  dome.  

 

Exposure  Settings  

!

Exposure  Mode:     The  Exposure  Mode  can  be  set  to  Auto,  Iris  Priority,  Shutter  Priority,  Manual.  

!

Auto:  The  iris,  shutter  and  gain  values  will  be  adjusted  automatically  according  to  the  
brightness  of  the  environment.  

Advertising