User manual – 3xLOGIC VISIX Camera User Manual

Page 22

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

14  

A  preset  is  a  predefined  image  position.  For  the  defined  preset,  you  can  click  the  calling  button  to  
quickly  view  the  desired  image  position.  
 

!

Setting  a  Preset:  

Steps:  

1) In  the  PTZ  control  panel,  select  a  preset  number  from  the  preset  list.  

 

Figure  4-­‐5

Setting  a  Preset  

 

2) Use  the  PTZ  control  buttons  to  move  the  lens  to  the  desired  position.  

!

Pan  the  speed  dome  to  the  right  or  left.  

!

Tilt  the  speed  dome  up  or  down.  

!

Zoom  in  or  out.  

!

Refocus  the  lens.  

3) Click  

  to  finish  the  setting  of  the  current  preset.  

4) You  can  click  

  to  delete  the  preset.  

NOTE:

 You  can  configure  up  to  256  presets.  

 

!

Calling  a  Preset:  

In  the  PTZ  control  panel,  select  a  defined  preset  from  the  list  and  click  

  to  call  the  preset.  

 

Figure  4-­‐6

Calling  a  Preset  

For  convenient  preset  selection,  refer  to  the  following  steps  to  navigate  to  the  preset  you  want.  
Steps:  

6) Select  any  preset  from  the  list.  
7) Click  the  preset  number  you  need  on  the  keyboard.  

 

Advertising