User manual, 5 configuring image settings – 3xLOGIC VISIX Camera User Manual

Page 53

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

45  

Fixed  Region:  The  fixed  region  encoding  is  the  ROI  encoding  for  the  manually  configured  area.  And  
you  can  choose  the  Image  Quality  Enhancing  level  for  ROI  encoding,  and  you  can  also  name  the  ROI  
area.  
Steps:    

1) Select  a  Region  No..  
2) Check  the  check  box  of  Enable  under  Fixed  Region.  

3) Click  

  and  draw  a  red  frame  in  the  live  view  image.  

4) Adjust  the  ROI  level  from  1  to  6.  The  higher  the  value,  the  better  image  quality  in  the  red  

frame.  

5) Enter  a  Region  Name  and  click  Save  to  save  the  settings.  

 

Figure  6-­‐26

Region  of  Interest  

 

6.5 Configuring  Image  Settings  

CONFIGURING  DISPLAY  SETTINGS  

Purpose:  
You  can  set  the  image  quality  of  the  speed  dome,  including  brightness,  contrast,  saturation,  
sharpness,  etc.  

NOTE:  

!

The  parameters  in  Display  Settings  interface  vary  depending  on  the  models  of  speed  
dome.  

!

You  can  double  click  the  live  view  to  enter  full  screen  mode  and  double  click  it  again  
to  exit.  

Advertising