9 cmp & emg interface settings, Cmp & emg interface settings – ADLINK PCI-8102 User Manual

Page 29

Advertising
background image

18

Installation

2.9

CMP & EMG Interface Settings

Jumpers J12 and J13 identify the CMP signal output interface as
Pull-Up or OPEN-Collector, with the latter requiring pull up of the
CMP signal.

To reduce evaluation and debugging, the PCI-8102 provides the
jumper J14 to enable or disable EMG function as the following set-
ting.

EMG disabled (Debug)

EMG enabled (Normal)

Advertising