American Time SiteSync IQ - Manual (Page 10)

© American Time
10
SiteSync IQ Installation Manual
System Controller
Setup Wizard
MON MAR 10 2014
10:38:06 AM USCT
American Time
Status=AUTO CDMA=S
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
Programming Procedure
Set Menu DST - LOCAL
Set DST (Auto)
8=Auto 9=Custom
0=Off OK=Accept
Set Menu Bias LOCAL
Enter Time Zone
offset from UTC
+ 11:30 OK=Accept
Set Menu LOCAL
Time Zone Code: 05
99=Custom USCT
<>=Scroll OK=Accept
Config Menu
Choose Service Lock:
xxxx
0000=Disable OK=Done
Config Menu
Choose User Lock:
xxxx
0000=Disable OK=Done
Setup Wizard
1=Enter Now
2=Bypass
3=Disable
Setup Wizard
Transmissions
1-Enable
2=Disable
• Press: 1 , and enter 4 digit User Lock or enter 0000 to
disable this feature.
User Lock
n Note: User Lock is the security level used for accessing time/date
and event menus.
• Press O
v
Enter 4 digit Service Lock or enter 0000 to disable this feature.
• Service Lock:
n Note: Service Lock is the security level used for accessing
System Controller configuration menus.
• Press
O
w
Select local time zone by using the <> keys or enter a
time code from Appendix B. Press O and skip to y . If a
custom time zone is needed, press 99 and O and
continue to x .
x
Enter offset from UTC for Custom Time Zone.
• Use <> to change + to -.
• Press O
y
Select Daylight Saving Time (DST) option.
• Option 8 causes automatic time changes to and from
DST under the changeover dates currently in effect in the
USA at the time of system manufacture. Press O and
skip to .
• Option 9 allows a custom DST to be entered. Press O and
skip to z .
• Option 0 turns off DST. Press O and skip to .
u
To Configure the System Controller:
Setup Wizard Main Screen
5
4
3
2
1
STOP If you chose Auto or Off in y , skip to .
If you chose Custom, continue to z .
Turn on the power to the System Controller
The first time the unit is powered up, it will prompt you (See
Setup Wizard Main Screen) to press:
1 To use the Setup Wizard
2 Bypass the Setup Wizard temporarily
3 Disable the Setup Wizard
n Note: Bypassing 2 or Disabling 3 the Setup Wizard will
prompt you to Enable or Disable transmissions.
14
14
14