American Time SiteSync IQ - Manual (Page 25)

25
©American Time
Adjust Time Menu
Glossary
Appendix
Troubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
SiteSync IQ Installation Manual
The Adjust Time menu serves two functions:
1. Manual correction of impulse secondary clocks, and
2. Simple synchronization of the system controller to an external time source.
Adjust Time
Choose:
1=Adjust System Clks
2=Ethernet Sync Now
Adjust System Clocks
1=Calculated Adjust
2=Man. Adjust Impulse
0=Cancel
Calc Clock Adjust
Enter Time Shown
on secondary clocks
00:00
Adjust System Clocks
Manual Adj. Impulsed
>=Advance Clocks
(1 per min) OK=Done
u
Press: 9 to access the Adjust Time Menu
v
Press 1 to enter Adjust System Clocks Menu
w
Press 1 to bring up the Calculated Adjust screen
Enter the time shown on the secondary clocks (to the nearest
minute). The time entered should be in 12 hour format as AM/PM
settings are irrelevant.
Press
O . The time difference between the secondary clocks and
the system controller is displayed.
Press
O to initiate automatic correction of the secondary clocks.
and return to the Adjust Time screen.
x
Pressing 2 in the Adjust System Clocks menu (#3 at right) brings
up the Manual Adjust screen.
Press
> repeatedly to correct impulse clocks manually.
Press O when finished to return to the Adjust Time menu.
y
Pressing 2 in the Adjust Time screen (#2 above) causes the unit to
attempt synchronization with external time sources* in order of priority.
If successful, a message confirming this flashes before the Time
Display screen appears.
*The time sync priority can be configured. Reference Settings &
Configuration on Page 43.
2
3
3a
4