American Time SiteSync IQ - Manual (Page 34)

© American Time
34
SiteSync IQ Installation Manual
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
Wired Signal Circuit Option
v Enabling and Disabling Signal Circuits
u Setting Signal Circuit Schedule and Duration (continued)
a. From the View Circuits screen, press 3 to enter the Enable Circuits
screen to view or change the control status of individual circuits.
b. For a signal circuit to be controlled by programmed events, it must be
enabled (on) and the status of the system controller must be set to
AUTO. To set status to AUTO:
Press 8 , enter User Lock and press O .
c. Setting the system controller status to OFF disables all signal circuits.
To set the status to OFF:
Press 0 , enter the User Lock (unless User Lock is disabled) and press
O (unless User Lock is disabled)
d. This screen shows the current default duration for all circuits. "<"
indicates an off default and ">" indicates an on default. To change the
default duration for a circuit, press the number of the circuit (i.e. 1 ).
e. The Select Circuit Duration screen shows the current default duration
for the selected circuit. This duration applies only for events that are
programmed with a duration of 0. Circuit duration can be for
a definite period (1-9 seconds) or for a time defined by two successive
events. The first event turns the circuit on, the second event turns it
off. To change circuit default duration:
• Press any number 1-9 to specify duration in seconds, or
• Press > to latch the circuit on, or
• Press < to latch the circuit off.
Pressing any of these options saves the circuit duration and returns to
the View Circuits screen ( a).
To see a programming example, see Appendix D.
Circuit Menu
Select Cir 1 Duration
5 Sec (1-9, <or>)
Latchin Off=< On=>
Circuit Menu
Select Circuit:
Cir 1 2
Dur < 1
1e
1d
Circuit Menu
Enable Cir: OK=Done
1=On 2=On 3=On
4=On 5=On 6=On
Circuit Menu
View Circuits for:
1=Schedule 3=On/Off
2=Duration Prog=Exit
2b
2a
MON MAR 10 2014
10:38:06 AM USCT
American Time
Status=AUTO ETH=Y