American Time SiteSync IQ - Manual (Page 79)

79
© American Time
SiteSync IQ Installation Manual
Appendix J: Quiet Mode
Glossary
Appendix
Troubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
Quiet Mode is a feature that will reduce the number of transmissions of your system controller. This will decrease the likelihood
of interfering with other equipment while increasing the life of the transmitter.
If Quiet Mode is enabled (reference page 49), the system controller will reduce the number of transmissions after 24 hours of
normal operation. This will allow time to install clocks during the initial system installation. After the initial 24 hours, Quiet Mode
will be designated on the main time display as follows:
Small Display Format Large Display Format
After the initial 24 hours, the system controller will be in Quiet Mode. This mode can be disabled for 6 hours by pressing 3-5-7
on the keypad. This will allow for installing additional clocks or changing the batteries on clocks. However, it is not necessary to
turn off Quiet Mode to correct the clocks. The clocks will correct automatically between the hours of 12:00:00 AM and 6:00:00
AM if they are off time.
Quiet Mode may be forced On by pressing 1-4-6 when on the main time screen. This will allow for turning Quiet Mode On
immediately in the event of a power outage instead of waiting 24 hours for the system to reset.
:12
PM MON MAR 10 2014 Q
02:16:12 PM USCT
American Time
Circts=AUTO GPS=S
2 : 1 6
MON MAR 10 2014 Q