Wired signal circuit option, 6f 6e – American Time SiteSync IQ User Manual
Page 32
© American Time
32
SiteSync IQ Installation Manual
Wired Signal Circuit Option
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
Reviewing and Editing Events by Date & Time
Reviewing and Editing Events by Weekdays
z
Reviewing and Editing Events by Schedule (continued)
a. Press:
P2
, enter User Lock (unless disabled) using the keypad and
press
O
(unless User Lock is disabled) to enter the Event Menu. From
here:
b. Press
3
to access the View Weekday screen.
c. Select the weekday needed by:
Pressing one of the
1
-
7
keys
Use the
<
and
>
keys to scroll through screens showing events
scheduled for that day. The steps for reviewing and editing selected events
are the same as those listed in Reviewing and Editing Events by Schedule
with one exception: event number cannot be used to jump directly to an event.
a. Press:
P2
, enter User Lock (unless disabled) using the keypad and
press
O
(unless User Lock is disabled) to enter the Event Menu. From
here:
b. Press
2
to access the Chronological Sort screen. The options given are
Sort or Cancel Sort. Either selection will go to the Hour screen (6c):
c. At the Hour screen, indicate the hour to start displaying events in
chronological order. Enter the hour as 2 digits in 24 hour format. Example:
the earliest programmed event is 5:00 AM; entering 05 (or an earlier hour)
and pressing
O
leads to screen 6d.
d. Use the
<
and
>
keys to scroll backward or forward through all
programmed events. The steps for reviewing and editing selected events are
the same as those listed in Reviewing and Editing Events by Schedule with
one exception: the event number cannot be used to jump directly to an event.
The Countdown Duration screen apprear:
e. Enter the countdown duration using the keypad or the
<>
scroll
keys. Press
O
.
n
Note: This countdown duration is only applicable if you have an
SQAxxxxxxC(1-6) digital clock. A countdown duration of 0 disables this feature.
The Message Number screen appears:
f. Enter the message number (see Page 27) using the keypad. Press
O
.
n
Note: This message number is only applicable if you have an
SQAxxxxxxC(1-6) digital clock. A message number of 0 disables this feature.
To see a programming example, see Appendix D.
Event Menu Time Sort
MTWTF 05:03 AM
Sch: 01 - Event: 0000
<>=Scroll OK=Edit
Event Menu Time Sort
Hour (24)
<>=Scroll OK=Edit
Event Menu WKD sort
View Weekday: MON
Sch: 01 - Event: 0000
<>=Scroll OK=Edit
Event Menu
View Events by
1=Schedule/Event
2=Dte/Tme
3=WKD
Event Menu
View Events by
1=Schedule/Event
2=Dte/Tme
3=WKD
7d
7c
8b
8a
7a
Event menu
Message Number
0 (0-5)
0=Disable OK=Accept
Event menu
Countdown Duration
0 Min (0-59 Min)
<>=Scroll OK=Accept
6f
6e
MON MAR 10 2014
10:38:06 AM USCT
American Time
Status=AUTO ETH=Y