American Time SiteSync IQ - Manual (Page 46)

© American Time
46
SiteSync IQ Installation Manual
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
Remote Connect Web Interface
1. Set Auto DST Dates: This allows the user to change the AUTO DST dates and times. This allows for future flexibility if the
DST were to change. The Update button must be pressed for changes to take effect.
2. User Password/Verify: This allows the user to change the User Password. The User Password must match the Verify Password to
be accepted. The Update button must be pressed for changes to take effect.
3. Service Password/Verify: This allows the user to change the Service Password. The Service Password must match the Verify
Password to be accepted. The Update button must be pressed for changes to take effect.
4. Banner Text: This allows the user to change the Banner Text displayed on the LCD screen of the system controller. The Update
button must be pressed for changes to take effect.
5. Time Sync Priority: This allows the user to change the Time Sync Priority. This feature is used to determine the priority of time
synchronization of the system controller. The Update button must be pressed for changes to take effect.
6. Time Display Format: This allows the user to change the Time Display Format on the LCD screens. The format chosen will
also be displayed on our American Digital Series Clocks. The Update button must be pressed for changes to take effect.
7. Manage User Lock: This allows the user to change the User Lock for accessing menus through the keypad of the system
controller. This lock must be numeric. The Update button must be pressed for changes to take effect.
8. Manage Service Lock: This allows the user to change the Service Lock for accessing menus through the keypad of the system
controller. This lock must be numeric. The Update button must be pressed for changes to take effect.
9. Display Size: This allows the user to change the LCD display size. The Update button must be pressed for changes to take
effect.
10.
Setup Manager: This allows the user to enable the Setup Wizard on a power cycle. If enabled the Setup Wizard will appear on
a power cycle. The Update button must be pressed for changes to take effect.
11. Quiet Mode: This allows the user to enable or disable Quiet Mode. If enabled the system controller will enter Quiet Mode in
24 hours. The Quiet Mode On/Off button allows the user to force Quiet Mode On for debugging. After toggling
Quiet Mode, return to the General tab to see status (pg 36). When Quiet Mode is Off, nothing will be displayed
on the bottom of the screen and when it is On, Quiet Mode in big red letters will be displayed. The Update button must be
pressed for changes to take effect. Reference Appendix J for more details on Quiet Mode.
12. Update with Latest Firmware: This allows a user to update the firmware of the system controller. The firmware file must be
downloaded from the support site to the PC which is running Remote Connect.
13. Reset All Settings: Pressing this button will reset the system controller to factory defaults.
n Note: Pressing this may change the IP address of the unit and it will have to be reconfigured to meet the network specifications.
Figure 16
Configuration Tab:
The Configuration Tab requires a service password for access. Within this tab, the user can change their passwords, update their firmware,
change their time synchronization priority, change the system controller’s banner text or turn Quiet Mode On/Off.