American Time SiteSync IQ - Manual (Page 6)

© American Time
6
SiteSync IQ Installation Manual
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
Back - UPS ES 550
Surge Pr otection
Power On Replace Battery
Battery Backup+ Surge Protection
System Controller Installation
MON MAR 10 2014
10:38:06 AM USCT
American Time
Status=AUTO CDMA=S
server rack
Shown with optional rack mount
option, Part No. H004100
System Controller with Internal Transmitter and Magnetic Mount Antenna
The Magnetic Mount antenna is standard equipment with 5 and 10 watt internal transmitter systems.
1. Choose a suitable location for the System Controller, following the safety precautions on Page 1:
a. Place the System Controller indoors.
b. Locate within 10 ft. of planned location for antenna.
c. Locate near an electrical outlet (120vac).
d. Rack or shelf mount.
e. If you have a sync option, review the applicable installation guidelines included in this manual.
2. Install the magnetic mount antenna per the instructions on Page 6.
3. Connect the cables to the System Controller:
a. Connect the antenna cable to the TX ANT port.
b. Connect the power supply to the POWER INPUT port.
c. Connect the power supply to 110v electrical supply (American Time recommends using surge protector/battery
backup Part # H002717A shown).
4. Turn on the power to the System Controller:
a. Place the rocker switch on the back of the unit to the ON position as shown above.
b. Confirm that the backlit display on the front of the unit lights up and displays text.
5. Follow the Setup Wizard instructions on pages 9-12.
n Note: Follow these instructions for System Controllers ordered without a transmitter (for wired operation only), except disregard steps 1b
and 3a.
Part #H002717A