11 set payload communication time-out, 12 enable payload control, Table 7-27 – Artesyn ATCA-9305 User's Manual (May 2014) User Manual
Page 179: Set payload communication time-out command, Table 7-28, Enable payload control command, System management
System Management
ATCA-9305 User’s Manual (10009109-07)
179
7.11.11 Set Payload Communication Time-Out
The Set Payload Communication Time-Out command sets the payload communication time-
out value.
7.11.12 Enable Payload Control
The Enable Payload Control command enables payload control from the Serial Debug interface.
Table 7-27 Set Payload Communication Time-Out Command
Type
Byte
Data Field
Request Data
1:3
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
4
Payload Time-out
Payload communication time-out measured in hundreds of
milliseconds. Thus, the payload communication time-out may vary from
0.1 to 25.5 seconds.
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Table 7-28 Enable Payload Control Command
Type
Byte
Data Field
Request Data
1:3
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)