Artesyn ATCA-9305 User's Manual (May 2014) - Manual (Page 245)

Management Processor Monitor
ATCA-9305 User’s Manual (10009109-07) 245
9.11.4 fru
The fru command opens, closes, saves, sets, shows, dumps, and loads fru data to and from the
IPMC.
Definition
fru <command> [ arg1 arg2 … ]
command := [ open | close | save | set | show | dump | load | create ]
fru open <id>
fru close
fru save
fru set <section [chassis|board|product]><field><value>
fru set <section> <field> <value>
section := [ chassis | board | product ]
fru set chassis <field> <value>
field := [ type | part | serial ]
fru set board <field> <value>
field := [ date | maker | name | serial | part | file ]
fru set product <field> <value>
field := [ maker | name | part | version |serial | asset | file ]
fru show
fru dump <address>
fru load <address><size>
Set data in the internal use area.
fru set internal <source addr> <internal use offset> <count>