Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 115)

4-74 Programmer’s Manual
if (sStatus != 0)
printf("Scan error-- %d\n", sStatus);
else
{
spkBeep(1, 1000);
sStatus = scnScannerHit(); // Check scanner buffer
if (sStatus == 0)
printf("Scanner buffer is\nempty\n");
else // Display result
printf("Bar code scanned was a %d", sStatus);
}
}
}
}
sStatus = scnCloseScanner(); // Disable scanner
}