Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 195)

7-4 Programmer’s Manual
F L A S H
Description
The FLASH Utility loads a disk image into the printer, using the
specified flash ROM.
To use this utility, you must include it in the
disk image.
For more information, see “Loading Disk Images into the
Printer” in Chapter 3.
Syntax
FLASH imagefile [options…]
Parameters
imagefile A fully-qualified path to the disk image file. If the
image file is in the same directory as FLASH.EXE,
give only the file name.
You must use the drive that the printer recognizes.
For example, if the files are on the PC’s C: drive,
but the printer refers to it as B:, use B: in the path.
options… One or more of the following options. Note these
options are case-sensitive.
/A or /1 Loads the first flash ROM (default).
/B or /2 Loads the second flash ROM.
/R:address Reads the block at address. It fills the
display with the data. Press e to
display the next group of data. To quit,
press b. This option is a debugging
tool.