Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 57)

4-16 Programmer’s Manual
unsigned short far pascal StockPrompt
(unsigned short far * lpusLenInches,
unsigned short far * lpusWidthInches);
void main()
{
PRINTINIT rConfig;
unsigned short usStatus = 0;
/* Initialize printer with no font storage */
rConfig.lpuchFntAddr = 0;
rConfig.ulFntSize = 0;
usStatus = pcl I nit(&rConfig);
if (usStatus != 0)
{
printf("Init Failed \nError: %d", usStatus);
exit(1);
}
/* Calibrate with the function doing all the prompts */
usStatus = pclCalibrate(0xFFFF, 0xFFFF, 0xFFFF, 0, 0);
if (usStatus != 0)
{
printf("Calibrate Failed \nError: %u", usStatus);
pclClose();
exit(1);
}
/* Calibrate with constant 2" width and paper type */
/* Let function prompt for the stock length */
usStatus = pclCalibrate(0xFFFF, 200, MMS_LOW_ENERGY, 0, 0);
if (usStatus != 0)
{
printf("Calibrate Failed \nError: %u", usStatus);
pclClose();
exit(1);
}
/* Calibrate paper but use our callback function to prompt */
usStatus = pclCalibrate(0, 0, 0, StockTypePrompt,
StockPrompt);