Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 199)

7-8 Programmer’s Manual
O N L I N E
Description
To test any MPCLII packets you create, use the ONLINE Utility
with Label Designer to perform test prints. The communication
parameters specified in the command line must match the
parameters specified in Label Designer. This utility supports
the same MPCLII packets as the printer.
To run this utility, enter the command at the printer’s DOS
prompt. While it is running, you can press the following keys:
K e y Description
F f+1 Calibrates the supplies in the printer.
C Clears a printer error.
B b Exits the utility.
Refer to the MPCLII Packet Reference Manual or Label
Designer Online Help for more information.
To use this utility, you must include it in the
disk image.
Syntax
ONLINE [options…]
Options
You can enter one or more of the following options on the
command line.
/Bbaud Baud rate. Values are 300, 1200, 2300, 4800, 9600,
19200, 38400, 57600, and 115k . The default is 19200.
/Pparity Parity. Values are N (none), 0 (odd), E (even), M
(mark), and S (space). The default is N.