Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 191)

6-6 Programmer’s Manual
SAMPLE5.C in the Samples sub-directory illustrates how to use
the scanner.
R e a d i n g T r i g g e r P r e s s e s
Pressing any key (including the trigger) sends a code to the
application for it to read. The trigger emulates an F11 as an
extended character code. To read a trigger press, the
application reads two characters. If the first is character is a
zero and the second is 0x85, the operator pressed the trigger.
SAMPLE1.C in the Samples sub-directory illustrates reading
trigger presses.