Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 74)

Function Reference 4-33
sStatus = pcl I nit(&pConfig);
if (sStatus != 0)
printf("Init Failed \nError: %d", sStatus);
else
{
usStatus = pclGetBatteryLevel();
if (usStatus <= 711) // Check battery
printf("Charge your battery");
else
{
usType = pclGetSupplyType(); // Get supply type
switch (usType) // Display result
{
case MMS_LOW_ENERGY:
printf("Using regular paper");
break;
case MMS_MEDIUM_ENERGY:
printf("Using fax paper");
break;
case MMS_HIGH_ENERGY:
printf("Using synthetic paper");
break;
default: printf("Error-- press any key when reset.");
_getch();
pclClearError();
}
}
}
pclClose(); // Close Print subsystem
}