Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 176)

Data Structure Reference 5-17
Font ID Memory Needed
1009 12,440
1010 6280
1011 8392
1012 5272
1013 9112
To determine the memory needed for fonts created with the
Font Utility:
1. Open the font file in any text editor.
2. Note the last number on the font packet’s first line. For
example, in the following line, the number in question is
386.
{W,1000,A,R,386|
3. Use the number from the previous step in the following
calculation:
(number * 16) + 1000
4. Use the result of this calculation as the number of bytes
needed for font memory.