Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 68)

Function Reference 4-27
printf("Init Failed \nError: %d", usStatus);
else
{
usStatus = pclGetBatteryLevel(); // Check battery
if (usStatus <= 711)
printf(“Charge your battery”);
else
{
usStatus = pclGetBlackMarkSensor(); // Get sensor state
switch (usStatus) // Display result
{
case 1: printf("Supplies are aligned");
break;
case 0: printf(“Supplies misaligned or system error”);
break;
default: printf("Error-- press any key when reset.");
_getch();
pclClearError();
}
}
}
pclClose(); // Close Print subsystem
}