Basler Electric BE1-11 Modbus Protocol - Manual (Page 161)

9424200774 Rev B 155
Alarms and Targets Reporting
Alarm and target information is obtained by reading the appropriate register. If an alarm or target is
present, the register will return numeric a value. In a case where more than one alarm or target is present,
you must repeat reading of the register until a value of zero (0) is returned.
Table 5 lists the reporting registers. Table 6 provides a list of possible alarms and targets reported by
these registers.
Table 5. Reporting Registers
Name Description Register Type Bytes
Major Alarm Read Alarms 1206 Uint32 4
Minor Alarm Read Alarms 1208 Uint32 4
Targets Read Targets 1210 Uint32 4
Relay Alarms Read Alarms 1212 Uint32 4
Logic Alarms Read Alarms 1214 Uint32 4
Table 6. Alarms and Targets
Index Description
64 60FL Alarm
69 60FL Target
99 24 Target
100 24 Alarm
163 27-1 Target A
164 27-1 Target B
165 27-1 Target C
195 27-2 Target A
196 27-2 Target B
197 27-2 Target C
227 27-3 Target A
228 27-3 Target B
229 27-3 Target C
259 27-4 Target A
260 27-4 Target B
261 27-4 Target C
291 27-5 Target A
292 27-5 Target B
293 27-5 Target C
323 27X-1 Target 3V0
324 27X-1 Target V2
325 27X-1 Target Aux
326 27X-1 Target Vx 3rd Harmonic
327 27X-1 Target V1
355 27X-2 Target 3V0
356 27X-2 Target V2
357 27X-2 Target Aux
358 27X-2 Target Vx 3rd Harmonic
BE1-11 Alarms and Targets Reporting