Beisler 1360-4 - Manual (Page 101)

D-32
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
1. Insert the memory card into the slot on the operating panel.
2. Select the programming menus:
• Press the ( key
3. Select the MEMORY CARD function:
• Press the b key
4. To overwrite the selected seam shown on the display, select the
CARD – > CURRENT SEAM function:
• Press the b key
or
5. To overwrite all sewing programs, select the CARD – > ALL VA-
RIABLES function:
• Press the d key
6. Confirm the selection:
• Press the % key
7. The display shows * O.K. PLEASE WAIT* until the data transmission
has been completed.