Beisler 1360-4 - Manual (Page 97)

D-28
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
Copying a seam into a sewing program
Existing seams can be copied into the sewing program and then be mo-
dified in accordance with the specific application. This procedure is
usually easier and quicker as the copied seam already contains sewing
functions and parameters required for the new seam. The programming
always refers to the currently selected sewing program.
1. Select programming menus:
• Press the ( key
2. Select the INITIAL PARAMETER function:
• Press the e key
Programming level 2 is displayed.
3. Select the COPY FROM SEAM NO. function:
• Press the c key
4. Enter the number of the seam to be copied into the input field.
5. Confirm copy process:
• Press the % key
6. The display shows * O.K. PLEASE WAIT* to indicate that the copy
process has been successfully completed.
Then, the seam number is shown in the display field of the sewing
program.
Modifying a sewing program seam
The sewing parameters that were changed as a result of the copy pro-
cess can now be fit to match the production process. The sewing para-
meters of a sewing programs can be changed separately for the A and
B machines in three stages:
1. Quick change of the major parameters for a sewing function by
using the input fields.
2. Access to the complete parameter list of a sewing function.
3. Enabling or disabling of a sewing function or machine function.
See also „Modifying sewing parameters/sewing functions“ in Section
3.1., „Operational menus“.