Beisler 1360-4 - Manual (Page 90)

D-21
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
37 C-CLAMP CLOSE ->FUSER UP
Time delay after the bonding clamp has closed before the bonding
stamp opens (bonding duration depends on the material that is used)
39 A-HEAD STITCH LENGTH ...
Stitch length of the seam at the A machine, must be fit to match the
mechanical stitch length setting (puller speed should be set to medi-
um range, approx 50)
40 B-HEAD STITCH LENGTH ...
Stitch length of the seam at the A machine (see parameter 39)
41 TOP FEEDING MAX POS.
Maximal fullness, value must not be changed
42 DIFFERENTIAL MAX POS.
Maximal fullness, value must not be changed
Enabling/disabling a seam in a sewing program
In a sewing program, individual seams can be disabled. A disabled
seam is not permanently erased; it can always be reenabled, if requi-
red. This function affects only the currently selected sewing program.
You should always note the current setting as a modified sewing pro-
gram does not indicate which seams are disabled.
1. Select the SEWING SEQUENCE function:
D
• Press the b key
2. Position the cursor on the number of the seam that is to be disabled:
• Press the &or / key
3. Disable seam:
• Press the 0 key at the numeric keypad
4. Confirm change:
• Press the ( key
On the display, the seam number disappears from the sewing sequence.
To reenable the seam:
1. Select the SEWING SEQUENCE function:
D
• Press the b key