Beisler 1360-4 - Manual (Page 72)

D-3
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.1
Operating panel
D.1.1 Description of the operating panel
Fig. 1: The operating panel is the display and data input medium of the
machine control. It contains the microprocessor that controls the machi-
ne and the storage media (EPROM) for backups of the program control.
Display 1
The display shows information about the
machine control and the sewing program
parameters. If a function for a sewing pro-
gram is enabled or disabled, the symbol for
that function and the pertaining parameter
value are displayed or disappear.
Slot 2 for memory card
The memory card is the storage medium for
backups of any machine control data. Se-
wing programs can be copied to the memo-
ry card and retrieved back into the machine
control, if required.
Program stop switch 3
This switch is used for cancelling the ma-
chine cycle.
Numeric keypad 4
Use the numeric keypad to enter all changeable numeric values.
The sewing programs M01-M09 are activated by entering the cor-
responding numbers. To activate the sewing programs M10-M20,
press the M key, then enter the corresponding numbers. Use the P
key to select submenus, to confirm data input or to exit the pro-
gramming mode.
Arrow keys 5
Each pressing of the UP or DOWN arrow key will move the cursor
one line up or down in the selected menu.
Use the LEFT or RIGHT arrow key to mark the desired parameter
in the selected menu or to scroll through the selected menu if the
parameter list consists of several pages.
Function keys 6
Use the function keys to select the program control menus.
Symbol bar 7
The symbol bar indicates the menus that can be selected directly
from the start level by using the function keys.
All other menus for setting machine or program functions can be
selected from the various program levels. The display of the opera-
ting panel shows the pertaining menu symbols.
Fig. 1