Beisler 1360-4 - Manual (Page 82)

D-13
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
# Puller speed
The photocell determines the deviation of the fabric contour from the
ideal routing and adjusts the puller speed accordingly, if required.
• If the sewing pieces are shifted sideways away from the stop, the
puller speed is too high,
• if the sewing pieces warp at the stop, the puller speed is too low.
14 PULLER SPEED
Major parameter/basic setting for speed
15 PULLER FASTER
Speed increase if sewing piece warps at stop
16 PULLER SLOWER
Speed reduction if sewing piece is shifted away from stop
17 STITCH TILL PULLER DOWN
Distance after sewing start before the puller is lowered
18 STITCH WITH PULLER DOWN
Length of the distance along which the puller pulls the sewing piece
19 STITCH TILL PULLER UP
Length of the distance along which the puller lifts to slacken the se-
wing piece
33 WAY TO HELP ROLL CLOSE
A machine: Distance after sewing start before the contour roller is lo-
wered
B machine: Distance after which photocell 15 brightens
34 DUTY HELP ROLL CLOSED
Length of the distance along which the contour roller moves along in
the lowered state
x Roller
The parameter changes the length of the distance along which the roller
transports the sewing piece from the A machine to the pick-up point of
the cross transport or, at the B machine, from the worktable to the stak-
ker.
25 STITCH TILL ROLLER DOWN
Sewing distance after sewing start before the roller is lowered; only
required for heavy materials
26 STITCH WITH ROLLER DOWN
Length of the distance along which the roller transports