Beisler 1360-4 - Manual (Page 87)

D-18
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
4. Change the value:
• Press the & or / key
or enter a two-digit or three-digit value using the numeric keypad. In-
put sequence: Hundreds digit, tens digit, units digit.
5. Confirm input:
• Press the ( key
6. Exit menu and return to access level 2:
• Press the ( key
7. Return to access level 1:
• Press the ( key
The following basic parameters can be modified:
01 PHOTOCELL REACTION TIME
Delay between insertion process (photocell darkens) and beginning
of sewing
02 PHOTOCELL -> FOOT DOWN
Duration before pressure foot is lowered and chain cutting function
is activated (this setting depends on the sewing materiall)
03 FOOT DOWN -> SEWING
Duration during which top thread slackens before being retensioned
04 CHAIN CUT.SUCTION (BEG.)
Duration of chain cutting function at beginning of sewing, longer suc-
tion period required for three-thread machines; switch-off for saving
energy
05 CHAIN OFF STITCHES
Distance for postsewing stitches when the sewing piece is removed
from the sewing unit during the sewing process
06 CHAIN CUT.SUCTION (END)
Duration of chain cutting function at end of sewing; switch-off for sa-
ving energy
07 SEWING STOP -> FOOT UP
Period during which the top thread slackens at the end of the seam
08 PHOTOCELL BLOCKED (END)
Time delay for insertion of new sewing piece (blocking period after
photocell brightens)