Beisler 1360-4 - Manual (Page 22)

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-12
B.2
Functions of the machine
Swing arm, Fig. 12:
The swing arm 1 receives the sewing pieces 1 from the cross trans-
port 2 and lines them up at the contour guide of the B machine.
Transport unit of the B machine, Fig. 13:
The transport unit of the B machine comprises the puller 1 and a
roller 4.
• The puller transports the sewing pieces during the sewing process,
• the roller moves the sewing pieces from the worktable to the stak-
ker. To ensure that the trousers panels are stacked flush at the
stacker, the roller swings out at the pivot 3 when inseams are
sewn.
The working plate has compressed-air nozzles 2 near the B machi-
ne. Just like at the A machi-
ne, the transport process is
supported by a compressed
air cushion.
Fig. 12
Fig. 13