Beisler 1360-4 - Manual (Page 84)

D-15
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
Sewing speed at waist curve
The settings determine the puller speed for the sewing of the waist cur-
ve. Depending on the waist curvature, a puller speed that has been ad-
apted accordingly can be set.
20 SLOW BY WAIST CURVE
Major parameter/basic setting for puller speed
21 TILL SPEED SLOW
Distance along which sewing is performed at normal puller speed
before speed is reduced in the waist curve area (photocell 15 is the
reference point)
22 DURATION OF SLOW SPEED
Distance along which the waist curve sewing speed is reduced
23 PULLER AFTER SLOW SPEED
Remaining distance along which puller speed is increased to normal
level
35 TILL BLOWING
Length of the distance to the end of seam that is sensed at the B
machine for blowing off the waist (from photocell 15 to photocell 2)
10 DURATION OF BLOWING
Period during which the fly is blown off
11 TILL ARM SWINGS
Distance from beginning of sewing at the B machine before the arm
swings in (photocell 15 is the reference point)
44 PULLER SWINGING
Only required for inseam;
Enable function = 01
Disable function = 00
u Settings for A machine
u Settings for B machine
The settings determine the sewing behavior of the A and B machines.
01 SLOW SEWING SPEED
Rotational speed at reduced sewing speed during start distance (see
parameter 03)
02 FAST SEWING SPEED
Rotational speed at normal sewing speed
03 SLOW SEWING STITCHES
Distance of the slow sewing start