Beisler 1360-4 - Manual (Page 28)

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-18
B.2
Functions of the machine
A sewing program can be combined with one seam or with several seams.
If a sewing program with several seams is selected, the seams are effected
from left to right in the sequence of their seam numbers. The sequence of
the seam numbers can be changed.
Factory settings
The program control has three factory-installed sewing programs.
• M 0 - M 03 for standard fabric materials.
• M 09 sewing program for manual finishing.
• M 07 - M 08: These memory locations are unassigned.
• M 10 - M 20: Use these memory locations for modified or freely pro-
grammable sewing programs.
The symbols for the sewing programs indicate the sections of the seam
for which fullness has been programmed.
M 01 normal rear panel
M 02 rear panel with excessive waist curve
M 03 front panel with knee lining