Beisler 1360-4 - Manual (Page 48)

C-8
Service Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
C.3
Start-up
C.3.5 Safety check
Before the machine is released for operation, all safety devices must be
checked for their correct operation.
CAUTION - Danger of injuries!
The safety devices protect the operating and service per-
sonnel while are working on or with the machine.
If the safety devices are fully or partially inoperative, the
machine must not be started up.
Perform safety check:
1. Check to see if the protective strap around cross transport and stak-
ker has been shifted down to the secured position.
3. The main switch also serves as an emergency off switch. To check
the function of this switch, turn the machine on, start a machine cy-
cle and turn the machine off during the sewing process using the
main switch. All operational movements of the cross transport and of
the assist transport as well as the sewing process must stop, and
the program control must switch off.
4. Check the function of the program stop switch by starting a machine
cycle and pressing the switch. The machine operation must be inter-
rupted.
5. Unlock the program stop key. The program control initiates a reset,
the cross transport must move to its basic position, and the stacker
mechanisms must be in its basic position.