Beisler 1360-4 - Manual (Page 26)

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-16
B.2
Functions of the machine
B.2.9 Operating panel
Fig. 17: The operating panel is the display and data input medium of the
machine control. It contains the microprocessor that controls the machi-
ne and the storage media (EPROM) for backups of the program control.
Display 1
The display shows information about the ma-
chine control and the sewing program para-
meters. If a function for a sewing program is
enabled or disabled, the symbol for that
function and the pertaining parameter value
are displayed or disappear.
Slot 2 for memory card
The memory card is the storage medium for
backups of any machine control data. Sewing
programs can be copied to the memory card
and retrieved back into the machine control,
if required.
Program stop switch 3
This switch is used for cancelling the machine
cycle.
Numeric keypad 4
Use the numeric keypad to enter all modifia-
ble numeric values. The sewing programs
M01-M09 are activated by entering the corresponding numbers. To ac-
tivate the sewing programs M10-M20, press the M key, then enter the
corresponding numbers. Use the P key to select submenus, to con-
firm data input or to exit the programming mode.
Arrow keys 5
Each pressing of the UP or DOWN arrow key will move the cursor one
line up or down in the selected menu.
Use the LEFT or RIGHT arrow key to mark the desired parameter in
the selected menu or to scroll through the selected menu if the para-
meter list consists of several pages.
Function keys 6
Use the function keys to select the program control menus.
Symbol bar 7
The symbol bar indicates the menus that can be selected directly from
the start level by using the function keys.
All other menus for setting machine or program functions can be sel-
ected from the various program levels. The display of the operating
panel shows the pertaining menu symbols.
Fig. 17