Beisler 1360-4 - Manual (Page 39)

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-29
B.3
Operation
7. Fig. 28: The swing arm 2 lines
the sewing pieces 3 up at the
stop 4 in the sensor range of
the photocell 1; this starts the
sewing process at the B machi-
ne. The seam is sewn and ser-
ged automatically.
8. Fig. 29: The trousers panels 1 are then
moved across the worktable to the stacker unit
2 where they are stacked on top of each
other.
8. Fig. 30: Due to its overlapping
mode layout, the automatic ser-
ging machine is very efficient:
Up to four trousers panels can be
integrated in one machine cycle.
• Sewing pieces 1 on the
shelf.
• At the B machine, a trousers
panel 5 is sewn.
• The trousers panel 4 is at
the wait position at the B
machine.
• Panel 3 is received by the
cross transport.
• Panel 2 is lined up at the
B machine.