Beisler 1360-4 - Manual (Page 75)

D-6
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.2
Program control
Memory
Sewing programs are stored in the memory (M).
The program control memory can contain up to 20 sewing programs
(M 01-M 20).
All sewing programs stored in the memory can be copied and stored to
the memory card for data backup.
Factory settings
The program control has three factory-installed sewing programs.
• M 01-M 03 for standard fabric materials.
• M 09 Sewing program for manual post-sewing.
• The mamory locations M07-M08 are freely programmable.
• M 10-M 20 are reserved for modified or freely programmable se-
wing programs.
The symbols for the sewing programs indicate the sections of the seam
for which fullness has been programmed.
M 01 normal rear panel
M 02 rear panel with excessive waist curve
M 03 front panel with knee lining