Bolide Dvr Client - Manual (Page 23)

DvrClient Software Operation Manual
- 23 -
Picture 5-14
Move PTZ camera to a specified position, and click < > icon to finish this preset point.
Select one preset point and Click < > icon to call this preset point.
Select one preset point and click < > icon to delete the preset point.
5.1.7.2 Cruise
If one channel adds two or more than preset point, you could configure one
cruise route according these preset points. Details configuration please follow
below steps:
1. Select one channel you want to cruise and click < > button to enter into the
window shown as Picture 5-15.
Picture 5-15
2. Select one cruise route and double-click the mouse or click < > icon to call the
cruise, and click < > icon to stop the cruise.
5.1.7.2 Video Control
Click < > icon to enter into the window shown as Picture 5-16.
Picture 5-16
<Video control> icon describe as follows: