3 email – Bolide Dvr Client User Manual
Page 33
DvrClient Software Operation Manual
- 33 -
Picture7-12
¾ Resolution: support CIF
¾ Frame rate: PAL:1--5f/s;NTSC:1--6f/s。
¾ Bit rate: allow you select relative stream.
¾ Audio:When set to <Enable> under the main stream mode, device will record and transfer
video and audio simultaneously; and set to <Enable> under the sub stream mode, you are
allowed to transfer video and audio simultaneously on the Live mode.
7.3.3 Email
Select <Enable email> option shown as Picture 7-13.
Picture7-13
¾
SSL:
is a security link transport protocol. You can encrypt your communication info
(including your email) using SSL to prevent hackers from monitoring your email or
communication info and even your password.
Please set SSL to “On” via Gmail.com server, and set to “Off” via other mail server.
¾ SMTP Port: indicate one kind of mail transmittal port opened by Simple Message
Transfer Protocol (SMTP). The port number for most mails is 25 except such as
Gmail server (Port number: 465).
¾ SMTP server: indicates server address you used.
¾ Sender address: indicates sender’s email address. The email address should be
consistent with the server you use. That is to say, when you use email address –
, the according server should be smtp.gmail.com.
¾ Receiver address: indicates receiver’s email address. The email address is used to
receive image transmitted from alarm DVR. Please clear the images you have
received as soon as possible to avoid overloading your email account.
STMP protocol setting please refers to below Picture 7-14 and Picture 7-15.