Document Outline

• Introduction
  • Warnings And Special Information
  • Important Warranty Information
  • Features
  • Thermal Printer Technology
    • The Printing Process
  • Thermal Consumables
    • Media Selection
    • Ribbons
  • Thermal Features
    • Emulations
    • Hardware Options
  • Setting Up The Printer
    • Unpacking The Printer
    • Check List
  • Installation
  • Installing The Print Head
    • Installing The Print Head
• Operation
  • Using The Printer
    • Controls And Indicators
    • Powering The Printer On
  • Loading Media And Ribbon
    • Loading Labels Inside The Printer
    • Loading Labels From Outside The Printer
    • Adjusting The Print Head Pressure
    • Loading The Ribbon
  • Printer Options
    • Tear-Off And Tear-Off Strip
    • Label Peel Off (Optional)
    • Label Batch Rewind (Optional)
    • Installing The Cutter (Optional)
    • Installing The NIC Board (Optional)
  • Printing Adjustments
    • Label Variations And The TOF/Paper Out Sensor
    • Media Sensor Horizontal Adjustment
    • Running The Calibrate Via The Menu
  • Cleaning
    • General
    • Print Head
• Configuring the printer
  • Control Panel
    • Function Keys And LEDs
  • Configuring The Printer
    • Overview
    • Menu Navigation
    • Setting Printer Configuration Parameters
    • Moving Within The Configuration Menu
  • File Menu
    • Factory Reset Functions
    • Others Parameters
  • Enabling and Modes
    • Emulation Selection
    • Set Printer Mode
    • Paper Sensor Mode
    • Print Method Mode
    • Password Selection
    • Power Up Configuration
    • Closing Head Action
  • Printer Settings
    • Vertical Offset Adjustment
    • Backfeed Adjustment
    • Form Length Selection
    • Maximum Label Length Selection
    • Maximum Label Width Selection
    • Print Speed Selection
    • Slew Speed Selection
    • Backfeed Speed Selection
    • Print Head Heat Selection
    • Cut Cycle Selection
    • Paper Rewinder Torque
    • Ribbon Rewinder Torque
    • Horizontal Offset Adjustment
    • Set Time And Date
    • Override Print Parameters
  • Emulation Parameters CDL Menu
    • Vertical Offset
    • Backfeed Offset
    • Reference Offset
    • Row Offset
    • Column Offset
    • Select Final Character
    • Control Codes
  • Emulation Parameters CZL Menu
    • Set Format Prefix
    • Set Control Prefix
    • Set Delimiter Character
    • Resolution Mode
    • Label Length
    • Restore Unit Identifier
  • Emulation Parameters CPL Menu
    • X – Y Starting Point
    • Error Report
  • Diagnostic Menu
    • Run Automatic Adjustment
    • Paper Sensor Mode
    • Paper Sensor Control
    • Run No Paper Calibration
    • Run Manual Adjustment
    • Run Automatic Present Sensor Calibration
    • Printhead Type Detected
    • Counters Menu
  • Communication Parameters Menu
  • Serial Interface
    • Baud Rate
    • Parity
    • Data Bits Number
    • Stop Bits Number
    • Xon/Xoff Protoc. Selection
  • NIC Interface
    • IP Assignment
    • IP Address
    • Subnet Mask
    • Gateway Address
    • Host Name
    • Workgroup Name
    • Enabling SMTP
    • Mail Server Address
    • Email Notification Address
    • Email Printer Address
    • Contact
    • Location
• Troubleshooting
• Printer Specifications
• Conformity Declaration
  • EEC Regulations
  • FCC Part 15 Class A
• Serial Port Wiring
• Index Of Figures
• Index Of Tables