Fronius IG 300 - Manual (Page 23)

15
Symbols
(5)
(7)
(9) (11) (12)
(8)
(6)
(10)
(4)
(2)
(1) (3)
The display
Key (A) and (B)
-
For scrolling
Key (C):
-
For switching to the menu level
(“Menu”) or exiting the setup menu
(“Esc”)
“Enter” key (D):
-
For confirming a choice
Description of
the keys
(C) (D) (B) (A)
The FRONIUS IG is pre-configured and ready to use. There is no need to make any
initial settings before using it to feed power into the mains, which is a fully-automated
process.
The display unit’s power is supplied by the solar modules, which means that the display
unit can be used in the daytime.
Important! The FRONIUS IG’s display is not a calibrated measuring instrument. A slight
inaccuracy of a few percent is intrinsic to the system. A calibrated meter will be needed
to make calculations for the power supply company.
General
(1) Symbols for keys (A) to (D)
(2) Symbols for display modes „Now“ to „Setup“
(3) Range for display value ... for displaying the value
(4) Range for display unit ... for displaying the associated unit
(5) Segment column ... always shows the amount of power being fed into the mains in
real time - irrespective of the display mode selected. Displayed as a percentage of
the maximum power that your photovoltaic inverter is capable of feeding in.