Fronius IG 300 User Manual

Page 33

Advertising
background image

25

CO

2

reduction ... CO

2

emissions

saved over the period of time concer-
ned
(kg/t)

Maximum mains voltage ... largest
mains voltage (V) measured during
the time in question ... from the
master power module phase ...
Measured value applies to the three-
phase mains circuit
(Example: 231 V * 1.73 = 400 V)

Return ... amount of money earned
during the period of time in question
(currency can be selected in the Setup
menu)

Important! As with energy fed in, here too there may be discrepancies with other
measured values.

The chapter entitled „Setup Menu“ describes how to select a currency and charge rate.
The factory setting is 0.48 Euro per kWh.

Amount of CO

2

(in kg/t), which would be emitted in the production of the same amount of

current in a caloric power plant. The factory setting is 0.53 kg / kWh (source: DGS - the
German Society for Solar Energy).

Maximum power fed in ... largest
amount of power (W) fed into the
mains over the period of time in
question

Max

~

„Day“ / „Year“ /
„Total“ display
mode

(continued)

Minimum mains voltage ... smallest
mains voltage (V) measured during
the time in question ... from the
master power module phase ...
Measured value applies to the three-
phase mains circuit
(Example: 220 V * 1.73 = 380 V)

Min

*

Energy recorded by the consumpti-
on meter
... energy consumed during
the time in question (kWh / MWh;
optional consumption sensor)

Maximum module voltage ... highest
module voltage (V) measured during
the time in question

Advertising
This manual is related to the following products: