Fronius IG 300 - Manual (Page 7)

ud_fr_se_sv_00923 022005
III
Maintenance and repair may only be carried out by an authorised specialist
company.
There is no guarantee in the case of parts sourced from other suppliers that
these parts have been designed and manufactured to cope with the stresses
and safety requirements that will be placed on them. Use only original spare
parts (this also applies to standard parts).
Do not carry out any alterations, installations or modifications to the machine
without first getting the manufacturer’s permission.
Replace immediately any components that are not in perfect condition.
Qualified Staff
(continued)
Safety Precauti-
ons at the Machi-
ne Location Ensure when installing machines with cooling-air vents that the cooling air can flow freely
through the air vents without obstruction. Only operate the machine with the degree of
protection specified on the rating plate.
Care must be taken during installation to ensure that there is no occurrence
of electromagnetic interference with electrical and electronic equipment. EMC Precautions
Danger of damage to electronic components due to electrostatic discharge.
Take appropriate protective measures when replacing and installing the
components. ESD Protective
Measures
Electrical Installa-
tions Electrical installations may only be executed in accordance with the relevant
national and regional standards and specifications.
Only operate the machine if all its protective features are fully functional. If
any of the protective features are not fully functional, there is a danger to:
-
the life and well-being of the operator or other persons
- the equipment and other tangible assets belonging to the owner/operator
- working efficiently with the equipment.
Have any safety features that are not fully functional repaired by an autho-
rised specialist company before switching the machine on again.
Never bypass or disable safety features.
Safety Precau-
tions in Normal
Operation