Fronius IG 300 - Manual (Page 37)

29
- „Standby“ ... Use the „Enter“ key (D)
to switch on / switch off standby
mode.
(D)
The „Standby“ menu item provides the facility to put the FRONIUS IG into standby mode
manually.
The power electronics are switched off in standby mode. No power is fed into the mains.
The LED flashes orange.
The following messages appear alternately on the display:
„STANDBY“ „ENTER“
- The orange flashing LED goes off after dusk
- After sunrise the following day the feeding of power into the mains is resumed
automatically (LED will show steady green after the startup phase)
- While the LED is flashing orange, the feeding of power into the mains can be
resumed at any time (switch off „Standby“ mode)
- LED steady green: Switch on „Standby“ = manually switch off power feed into mains:
-
Press „Enter“ key (D)
- LED flashing orange: Switch off “Standby” = resume feeding power into mains
-
Press “Enter” key (D)
Setting the menu
items