Fronius IG 300 - Manual (Page 74)

66
The FRONIUS IG complies with the „Guidelines for connection and parallel operation of
in-plant generation systems with the low-voltage grid“ published by the German Electrici-
ty Industry Association (VDEW). It also complies with the „Technical guidelines for
parallel operation of in-plant generation systems“ published by the Austrian association
of electricity companies.
The equipment also complies with all the requisite and relevant standards and directives
that form part of the relevant EU directive, and therefore is permitted to display the CE
mark.
In the country-specific versions, the standard measurement and safety procedures
integrated into the FRONIUS IG ensure that, in the event of a mains failure (switch-off by
the energy supplier or damage to lines), the feeding in of power is immediately interrup-
ted.
More specifically, the FRONIUS IG complies with the following standard and directives:
-
General EMC standards
EN 61000-6-2, EN 61000-6-4
- General safety standard
EN 50178
- Overvoltage protection standard
EN 61000-4-5
- Standard for flicker measurements
EN 61000-3-11, EN 61000-3-12
- Directive 89/336/EEC on Electromagnetic Compatibility
- Directive 93/68/EEC on CE marking
- „Guidelines for the parallel operation of in-plant photovoltaic generation systems
with the low voltage grid of the electricity supply companies“ published by the
German Electricity Industry Association (VDEW)
„Technical guidelines for the parallel operation of in-plant photovoltaic generation
systems with the low voltage grid of electricity supply companies“ published by the
Austrian Electricity Plants Association
This ensures that approval of the equipment by the distribution network operator and the
electricity supply company is a straightforward process (see Annex for CE declarations).
Standards and
directives with
which the equip-
ment complies