Gasboy TopKAT Fuel Management System Installation - Manual (Page 73)

MDE-4319E TopKAT™ Fuel Management System Installation Manual · August 2008 Page 67
Wiring Diagrams Mechanical Interface Option
Figure 7-22: Wiring Diagram: 9820 115/230 VAC Domestic Dispensers
Notes:
1. The power resistor assembly is 8.2 kilo-ohm, 10 W (part number C05818) for 115/230 VAC domestic units and 30 kilo-
ohm, 10 W (part number C06683) for 230 VAC International units.
2. Before applying power, the TopKAT Pump Control PCB jumpers must be set for electronic pulser as shown in “Terminal
Block ID” on page 42 . Failure to properly set the jumpers will damage the TopKAT.