Orion System Lead Controller - Manual (Page 11)

Lead/Lag Controller Technical Guide
Section 3: Lead/Lag & 2 Lead/1 Lag Navigation & Status
11
Lead/Lag Status Screen
Figure 8: Lead/Lag Status Screen
Lead/Lag Status Screen
Figure 8 depicts the Lead/Lag Status Screen. To access the Lead/
Lag Status Screen, you might need to click the
<Switch to Lead/
Lag> button found on the lower left of the 2 Lead/1 Lag Status
Screen (Figure 9, page 12).
The screen is divided into separate windows as follows: Analog In-
puts, Binary Inputs, Relays, Analog Outputs, Outdoor Status, Lead/
Lag Enables, Schedule Status, and Alarms.
The Lead/Lag Status Screen Toolbar also gives you the options to
access Reset Factory Defaults, Save and Restore Setpoints, and Print
a Status Report for the current day.
The Lead/Lag Status Screen provides real-time live updates of the
current operating conditions and is used to access the various setpoint
and confi guration options.
No control takes place until you confi gure the operation of the Lead/
Lag application.
Once you confi gure your inputs, outputs, and operating schedules,
everything you need to monitor the Lead/Lag application is found
on this Lead/Lag Status Screen.
The rest of this technical guide explains each component on this
screen and provides detailed instructions for confi guring the data.
The following is a list of topics and their page numbers:
Analog Inputs, page 13
Binary Inputs, page 17
Relays, page 20
Analog Outputs, page 25
Outdoor Status, page 31
Lead/Lag Enables, page 31
Schedules, page 32
Confi guring Alarms, page 36
From the Top Toolbar:
Setpoints, Restore Defaults, page 37
Setpoints, Save and Restore, pages 37 & 38
Print Status Report, page 39