Orion System Lead Controller - Manual (Page 53)

Lead/Lag Controller Technical Guide
Index
53
Restoring Setpoints..............38
Reverse Acting Floating Point..............26
Reverse Acting PID..............26
Reverse Acting PID Control..............27
RH%..............15
RPM..............15
S
Saving Lead/Lag Setpoints..............37
Saving Schedules..............34
Schedule, Activation..............23
Schedule Confi guration Window..............33
Schedule Override..............35
Schedules..............33
24 Hour Operation..............34
Copying..............34
Erase..............34
Saving..............34
Schedule Setting..............32
Schedule Status Window..............32
Screens
Alarms Window..............36
Analog Input Confi guration Window..............14
Analog Inputs Window..............13
Analog Output Confi guration Window..............26
Analog Outputs Window..............25
Binary Input Confi guration Window..............18
, 23 , 24
Binary Input Window..............17
Control Setpoints Window..............28
Control Source Window..............28
Lead/Lag Controller Status Screen..............11
, 12
Holiday Schedule Window..............35
Main Control Method Window..............22
Prism 2 Main Screen..............10
Relay Confi guration Screen..............20
, 21
Relays Window..............19
Schedule Confi guration Window..............33
Schedule Status Window..............32
Setpoint Reset Source Window..............28
Sensor , Calibrate..............30
Sensor Override..............30
Sensor Reading Appendix..............15
Sensor Scaling..............15
Set 24 Hour Operation..............33
, 34
Setpoint Reset Source..............28
Setpoint Reset Source Window..............28
Setpoints
Copying..............38
Restoring..............38
Saving..............37
Setpoints Menu - Miscellaneous Settings..............37
Setpoints Menu - Restore From File..............38
, 39
Setpoints Menu - Save To File..............37
Setting Holidays..............35
Setting Schedules..............32
, 33
Software License..............9
Stand-Alone
Baud Rate..............8
Stand Alone Operation..............7
STATUS1..............9
STATUS2..............9
Status Report Example..............40
Status Report Preview
Window..............40 , 41 , 42 , 43 , 44 , 45 , 46 , 47
Status Reports
Printing..............39
Status Screen..............11 , 12
Step by Step Guide..............4
Support Information..............9
System Requirements
Prism 2..............9
T
Temperature Sensor
Communicating..............14
Thermistor Celsius Temperature..............14
Thermistor Fahrenheit Temperature..............14
Timers..............20
, 21 , 24
Timers Window..............24
Toolbar..............11
, 12
U
Unit Selection Window..............10
USB Driver Installation..............48
USB Serial Converter..............48
User Scaling..............15
User Scaling Box..............15
V
VDC..............15
Voltage..............30
Alternate Override..............30
Voltage Limits..............29
W
WattMaster Technical Support..............9
“WG..............15
Wiring Considerations..............6
R-Z